Stjarnagloss - Glö Hydrophobic Snow Foam

How to use Stjarnagloss Glö

Application: Apply Glö via a professional snow foam cannon using a pressure washer with at least 130bar for best results. If using a lower-powered washer, a stronger mix may be necessary. We recommend 100ml in a litre lance flask initially as a starting dilution but the product can be used at higher or lower concentrations.

Coverage: Cover the car uniformly in foam but do not allow the foam to dry out; never apply to hot panels.

Rinse: Allow the foam to dwell for a short time, then rinse thoroughly with water.

Maintenance: You MUST rinse out your snow foam cannon after using Glö, all sealant snow foams can gum up the snow foam cannon gauze/internals and prevent them working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.

Mixing Instructions

1L Bottle: 50-100ml. Good for creating up to 20+ litres of snow foam mixture, enough for 30-40 car washes.