CYC Snow Foam Lance

Snow Foam Lance

Snow foam lances are one of our best selling products and with good reason, in conjunction with a pressure washer they make car washing fun but more importantly reduce the risk of swirls and scratches often inflicted during the wash process.

Snow foam lances when combined with a car shampoo or ideally dedicated snow foam solution create a thick blanket of clinging foam which sits on the suface of the paint. The detergents in the snow foam gently soften and break down the dirt whilst the effect of gravity gently removes the dirt, grime and heavier deposits as the foam moves off the paint. This means that when used as a dedicated pre-wash stage by the time you come to actually hand wash the vehicle the heavier and potentially swirl inducing deposits will already have been removed so there is much less chance of scratching the suface during the regular wash process. You can also just use a regular car shampoo through the lance and directly sponge the suds which again is safer than the regular bucket wash.

You may be wondering why these are such a good value, but don't be put off by the price, this is a high quality snow foam lance manufactured to the highest standards. We buy these direct from the manufacturer in bulk allowing us to pass the savings directly onto you!

Each snow foam lance is constructed with a solid brass body for maximum durability. They have an adjustable valve on top to fully regulate the amount of foam the lance produces by precisely controlling the water shampoo ratio. The spray pattern is also fully adjustable and each snow foam lance comes ready to go with the adaptor of choice (select from drop down).

Specifications

• Micrometric detergent regulator screw with EPDM 70 seal and AISI 303 stainless steel bolt.
  Detergent dispenser made of shock-resistant plastic, AISI 304 stainless steel “duck-bill” foam diffuser, fan spray from 0° to 40°
• “Lozenge” for producing the foam, made of pressed AISI 304 stainless steel wires
• 1L polyamide detergent tank with non-deformable increased thread
• Brass body
• Nozzle made of AISI 304 Stainless steel
• Brass injector housing

Tech. features

• Inlet: G1/4” F
• Rated pressure: 160bar
• Working pressure: 180bar
• Max flow rate: 20l/min
• Temperature: 60°C
• Nozzle: ø1.25mm;