GYEON - Q²M RestartWash

GYEON Q²M RestartWash is a specialised decontamination shampoo designed to rejuvenate and unclog ceramic coatings. This deep-cleaning formula combines the benefits of a premium Car Shampoo with iron removal properties, effectively cleaning paintwork while simultaneously removing ferrous deposits and contamination that can reduce coating performance over time.

Over time, ceramic coatings accumulate contamination that clogs the surface and reduces beading and hydrophobic properties. RestartWash addresses this by removing mineral and metal contamination that mutes beading, restoring the coating's original slickness and improving water behaviour. The formula lifts traffic film without leaving fillers, providing a thorough reset for your coating's performance.

RestartWash offers flexible dilution options depending on your preferred washing method. For bucket washing, follow the label instructions for standard dilution. When using a snow foam lance, use 60ml per litre of water. The product has a concentration ratio of 1:1500 and consumption ranges from 2-30ml per car depending on contamination levels and application method.

Yes, RestartWash is formulated to be safe on all exterior surfaces, including paintwork, alloys, and wheel arches. It's specifically designed to be coating-safe, making it ideal for periodic maintenance of ceramic coated, sealed, or waxed vehicles. The pH level of 6 ensures it's gentle enough for regular use while still providing effective decontamination.

RestartWash should be used periodically as a reset treatment rather than for every wash. Use it when you notice reduced beading, decreased slickness, or when your coating appears to be underperforming. Gyeon recommends this as part of a maintenance routine to keep coatings performing at their best, typically every few months or when contamination buildup becomes apparent.

Always work on cool panels and pre-rinse thoroughly to remove loose dirt. Dilute according to the label instructions and wash from top to bottom using a clean wash mitt. Allow a short dwell time where safe to let the decontamination properties work effectively. Rinse thoroughly and dry with a quality microfibre towel or blower. You can follow up with a coating-safe detailer if desired for enhanced gloss and protection.