Optimum No Rinse Wash & Shine
This is the most technologically advanced car wash system that only requires 1-2 gallons of water to wash the entire car. Optimum No Rinse Wash & Shine does not require rinsing since there are no soapy surfactants to wash off into the storm drains.
This unique product contains substantive polymers which bond to the paint and protect it during the wash. Therefore, Optimum No Rinse Wash & Shine offers greater protection and lubricity than conventional car washes leaving a sleek & glossy finish behind afterwards. The wastewater in the bucket can be used to water the lawn or disposed of into a sink, where it will be treated!
Additional benefits are faster washes, ability to wash anywhere at anytime including washing inside the garage during the cold months, no messy water runoffs, and greater looking car finishes. These are some of the reasons Optimum No Rinse Wash & Shine is being used by many professional detailers across the country (see testimonials).
Optimum No Rinse™ Wash & Shine can also be used to wash motorhomes, motorcycles, boats, and planes.
Add 1 oz. of Optimum No Rinse to 1-2 gallons of water to make a no rise car wash. Soak Optimum Xtra Large Microfiber Towel in the wash bucket. Wash one car panel. Soak the towel in the wash bucket again and do another panel till the entire vehicle is washed. Use a fresh Xtra plush Microfiber Towel to dry the car. You can also dry and wax your vehicle by spraying Optimum Car wax on each panel as you are drying it.
Add 1 ounce to wash water made with your regular car wash. No Rinse Wash & Shine's advanced polymers and lubricants offer more surface protection and slickness than ordinary car soap alone. It acts as a water softener and conditioner to improve the quality of the water that touches your vehicle to provide the ultimate safe wash.
Add 2 ounces of No Rinse Wash & Shine to a gallon of water to make a super-slick clay bar lubricant. Wet the surface of your vehicle to provide a slippery protective layer beneath your clay. After you've clayed each section, simply wipe it dry. This solution is as effective as any clay lubricant you can buy!
Add 6 ounces of No Rinse Wash & Shine to a gallon of water to make an excellent quick detailer. Fill up a spray bottle with this mixture and use it to clean and shine your vehicle, just as you would use a traditional detailer. The proprietary polymers bond to the paint surface to protect it from abrasion and micro-marring as you clean. The incredible formula leaves your vehicle extremely slick and glossy, like you just applied wax!
1 litre (32oz) bottle - New Formula