Menzerna Heavy Cut Compound 400 (HC400) 1 Litre

Menzerna Fast Gloss FG400

Menzerna Heavy Cut 400 polishing compound capable of removing serious paint defects even on the toughest of clearcoat finishes, whilst finishing to a high gloss finish. Think of this as a one step polish on steroids!

The particles in the formula fracture under heat and pressure so you need less of the product and you’re less likely to burn the paint because you’ll use a lower speed. The particles start off by acting like a compound and then as they break down their properties change to act more as a polish. Menzerna polish are famous for producing uniform shaped particles in their polishes and it’s this that reduces hazing. It is so effective  at not inducing hazing that it possible to go directly form compounding to a finishing product.

Menzerna Fast Gloss contains twice as much milled Aluminium Oxide as found in Intensive polish so is capable of removing twice the defects. Where Intensive Polish is designed for swirls and moderate scratches, Fast Gloss is more hardcore so better for deeper scratches, 1000 to 1500 grit defects and water spots or for use on tough OEM paints. Like the rest of the range it is silicone and filler free so results are permanent.

In light coloured paints you’ll require only a little if any polishing afterwards, the darker black and red paints may require a further polish just to restore the gloss.

• Safe water based formula that has no fillers or silicones.
• Professional polish with a legion of fans.
• Suitable for deeper scratches and water spots.

Cut: 5.0 (Max: 5.0)
Gloss: 1.5 (Max:5.0)

Official Menzerna Data Sheet

1 Litre Bottle