Menu
Your Basket
GYEON - Q²M WaterSpot Remover
GYEON - Q²M WaterSpot Remover
GYEON - Q²M WaterSpot Remover
GYEON - Q²M WaterSpot Remover
GYEON - Q²M WaterSpot Remover
GYEON - Q²M WaterSpot Remover

GYEON - Q²M WaterSpot Remover

Read Reviews | Ask a question
GYEON Q2M Water Spot Remover is an effective solution for removing unsightly water spotting deposits from paintwork. GYEON Q2M Water spot is a mild acid cleaner that gently dissolves these deposits from the paintwork.  Read More
From
£11.50
Ex VAT: £9.58
500ml
Available: 20+
£11.50
inc. vat
1000ml
Available: 20+
£17.00
inc. vat
In Stock. Order within for delivery on Friday, 04th October. (Select Next Day Delivery at checkout.)

GYEON - Q2M Water Spot

GYEON Q2M Water Spot Remover is an effective solution for removing unsightly water spotting deposits from paintwork.

Water spotting occurs in hard water area and from regular rainfall as the water evaporates from the suface leaving behind calcium and mineral deposits, a problem that is most obvious in summer. GYEON Q2M Water spot is a mild acid cleaner that gently dissolves these deposits from the paintwork.

GYEON Q2M Water Spot remover is very easy to use. Before applying, clean the bodywork with a gentle, pH-neutral shampoo such as Gyeon Bathe and dry the surface. Then spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots.If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with a microfibre. If required - repeat.

GYEON Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, so the cleaned area can be wiped multiple times.

Features & Benefits:

  • Dissolves water spot marks quickly
  • Ideal for use on vehicles protected with nanotechnology-based quartz coatings
  • Particularly useful for freshly applied nanotechnology-based quartz coatings
  • Lubricating oils reduce chances of marring paintwork
  • Pre-diluted - ready to use

Technical Specification:

  • Bodywork safe
  • Quartz coating safe
  • Mildly acidic (pH 4-5)
  • Coverage: 15ml / panel

Using Gyeon Q2M WaterSpot

Ensure vehicle is clean and dry before use. For a deep clean Gyeon Q2M Restart Wash is a good starting point. Mist Q2M WaterSpot on to the panel, allow it to dwell for a few seconds and wipe with a soft microfibre towel. On fresh spots, mist Q2M WaterSpot on to a towel and wipe. Once complete, wash the vehicle down with shampoo.

Use on all exterior surfaces except for glass. Q2M WaterSpot can cause damage on glass and exterior surfaces if allowed to dry. Keep out of reach of children and use in a well ventilated area.

Available in 1 Litre & 500ml Bottle with sprayer

GYEON - Q²M WaterSpot Remover Reviews