Gtechniq - HALO v2

Application information

1. Shake bottle well and wear gloves

2. To apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essential.

3. If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and Gtechniq W6 Iron and General Fallout Remover

4. Spray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff Cloth With your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALO and the film or vinyl

5. Apply HALO evenly on the application pad and set the bottle aside.

6. Apply with applicator provided in overlapping strokes to an area roughly 2’x2’, or work to the bodylines of the vehicle

7. After coating a panel, remove residue with an microfibre cloth. Always remove from further than you have applied, working from the outside in

8. Once applied carry out a final check with an microfibre cloth and a bright but diffused light source – this will ensure no residue remains on the surface.

9. Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALO An unopened bottle of HALO has a 12 month shelf life from the time of purchase   

Store in a cool/dry place, out of direct sunlight  
Use within 3 months of opening