Meguiars #86 Solo One Cut & Polish - 1 Gallon

Location:  » Polishing » Meguiars Solo System

Meguiars Solo Cut & Polish Cream #86 is part of Meguiars Solo One Liquid System. The system utilizes one polish to eliminate a wide range of swirls and scratches. Uniformly sized, non-diminishing abrasives can be used for compounding and polishing. Switch pads to vary the polish’s performance.

Advanced Unigrit™ Technology delivers level cutting and polishing action to the blemish to provide smooth, swirl-free results. The Unigrit™ abrasives perform more or less aggressively depending on your pad selection. Use the Solo Wool Light Cutting Pad for defect removal. Then use the Solo Diamond Foam Polishing Pad for swirl-free polishing. Change the pads, not the polish. Meguiars Solo Cut & Polish Cream #86 is capable of scratch removal and gentle polishing.

“Unigrit" is a feature that describes the size and distribution of the particles on Meguiar’s Unigrit Finishing Paper. The benefits of "Unigrit" are the uniform marks left behind by the paper. With that said, "Unigrit" refers to the mechanical particles in Meguiars Solo Cut & Polish Cream #86, which is a very unique type of aluminum oxide. It is very uniform in shape, size and hardness. This makes the abrasives "Unigrit", allowing a very "level" cutting action. The abrasives diminish at a much slower rate than Meguiars true diminishing abrasive polishes, thus the abrasives cut longer and increase gloss.

Meguiars Solo Cut & Polish Cream #86 eliminates the experimentation and guesswork that goes into paint restoration. One polish is all you need!

For professional detailers, Meguiars Solo Cut & Polish Cream #86 is a dream to use. Instead of transporting multiple bottles of polishes and compounds, you only need one. Meguiars Solo Cut & Polish Cream #86 saves time because there’s no need to experiment with different polishes to find the right combination.

Directions - Defect Removal:

- Set rotary speed to 1800-2000 RPM. Choose the Solo Wool Light Cutting Pad or Foam Polishing Pad, depending on the severity of paint imperfections.
- Apply Meguiars Solo Cut & Polish Cream #86 directly to the paint and work in a 2 x 2 sq. ft. area. Keep the polisher moving at all times.
- Check work frequently. When the defects are gone, stop polishing and lift the polisher off the paint. Buff with a soft, clean microfibre cloth.

Directions - Final Polishing:

- Set rotary to 1400-1800 RPM. Choose the Solo Diamond Foam Polishing Pad or Diamond Foam Finishing Pad.
- Apply Meguiars Solo Cut & Polish Cream #86 directly to the paint and work in a 2 x 2 sq. ft. area. Keep the polisher moving at all times.
- Check work frequently. When the defects are gone, stop polishing and lift the polisher off the paint. Buff with a soft, clean microfibre cloth.

1 US Gallon