We have searched long and hard for the very best quality Snow foam lance on the market and in this new Heavy Duty Snow Foam Lance we really believe we have found it.
Constructed from a solid brass body it oozes quality which feels satisfyingly solid. Even the extension pipe is made from zinc and fits directly onto a Karcher pressure washer like any other attachment.
The nozzle on the snow foam lance can be adjusted for the pattern of foam delivered and the valve on the top regulates the chemical dilution rate.
Using this foam lance combined with a suitable shampoo and ideally snow foam it is possible to produce a very thick layer of foam which clings to the surface of the vehicle encapsulating, softening and removing dirt making the wash process much safer and more efficient (and fun!)
Max Pressure: 200 bar
Max Temp: 60°C
We stock a wide range of adaptors for most pressure washers on the market. Simply match the adaptor below to the coupling on your pressure washer and select from the options drop down and we'll send the right foam lance to match your machine.
Snow Foam Lance - Various fittings Images
The following Snow Foam Lance - Various fittings images have been submitted by customers.
The following reviews for Snow Foam Lance - Various fittings have been submitted to the site by customers and friends of the site. We think our product reviews are the most authoritative around, because they're from the people who know best - people like you.
Really pleased with this Snow Foam Lance. Works well with Valet Pro PH Neutral Snow Foam. Foam really clings to car.
Review by: Stefano Cantarelli 20/05/2013
Works great with my Nilfisk C110. Just be careful when you're screwing the bottle into the brass neck and treat the whole thing with care as I could see how it would be possible to shear the threaded part of the bottle as the actual hose part is heavy brass. Superbly made bit of kit though
Review by: Neil Atkinson 15/05/2013
Great product, well made and does an excellent job! Add to that excellent service from CYC.co.uk
Review by: Shaks 13/05/2013
I bought this lance after finally taking the plunge and deciding to buy all the gear I needed to carry out snow foaming. The lance itself is well built, easy to use, and produces a nice thick foam making pre-washing the car a pleasure.
I only have two minor gripes;
1) The plastic bottle - perhaps I just have a dodgy one, but the thread on the bottle is very soft and not very precise. It's quite easy to cross threads when screwing the lance on top, so care must be taken each time to ensure I don't ruin the thread anymore.
2) The plastic pipe which goes into the bottle has a square cut on the end, which can jam up against the side of the bottle and restrict the mixture from being drawn up. I'd read about this in another review, and cut the pipe to a 45 degree taper before I started, but it would be nice to have come manufactured this way.
Two very minor cons so for that I'll knock a star off, but don't let that dissuade you from purchasing it, it's a great product.
Review by: David 12/05/2013
This is a rock solid very solid and well built snow foam lance, producing very good foam that is thick and adheres well to the car.
It can also be easily stripped down for servicing or cleaning the filter.
It has a control on the top to adjust the quantity of snow foam liquid it uses and a control on the front to adjust the spray width.
Review by: PBD 06/05/2013
Good quality, works well with my Karcher power washer, only one small point the bottle should have mil markings on the side would make it more efficient for measuring the foam.
Review by: Douglas Bell 20/04/2013
Difficult to find the right mix/settings to get the correct foam.
(used with a Nilfisk)
Review by: Jacob 19/04/2013
Brilliant piece of kit.
Foams really good, nice and thick with shampoo and pre wash.
Really good build quality, great adjustability.
Review by: Anonymous 25/03/2013
Well built from brass and produces thick clinging foam. I say it's a lazy man's tool because with the filthy roads we've had recently (snow, slush, mud and salt) I just foam my car and rinse well, and the finish is more than acceptable. I've taken off a star because the detergent bottle is tall and thin, so the device falls over easily, and I worry about breaking it as it's made of brass: also in this cold weather the foam compound goes like jelly, so is hard to pour into the narrow neck.
Review by: Richard Green 24/03/2013
Excellent build quality - worth every penny & more!!!
Overall this product has an average of 4.82 out of 5 based on 107 ratings.
Snow Foam Lance - Various fittings Shipping
We offer a number of shipping methods for Snow Foam Lance - Various fittings based on your location and how quickly you want it to be delivered.
UK Mainland Delivery:
You can opt for Standard Delivery or if you're in a rush you can select the Next Day or Saturday delivery option. Next Day applies to orders placed before 14.00 and will arrive on the next working day. Saturday delivery orders must be placed before 14.00 on the Friday. Some geographical restrictions apply.
Orders over £100 to UK Mainland addersses are available with a Free Delivery option.
Scottish Higlands and Islands & Channel Islands:
We offer a number of shipping options based on weight and size of the overall order. For an accurate quote add the item to your basket and then view the shopping cart where you can get an accurate shipping price based on the weight of the order.
We do ship internationally, for an accurate quote add the item to your basket and then view the shopping cart where you can get an accurate shipping price based on the weight of the order.